Category Archives: Paint Tips & Ideas

7 Pro Tips for the Perfect Paint Job


  1. Clear the Room.

When starting a new painting project, take the time to clear everything out of the room. Many painting contractors have learned the hard way to make sure every piece of furniture and accessory is cleared out. Large furniture can be moved into the middle of the room and covered, but if you if there are repairs to the drywall that are necessary, you should move the furniture out of the room as well. Drywall can create quite a lot of dust that will get into the cushions of your furniture and is very hard to completely remove.

  1. Inspect Everything Thoroughly

Before putting on the first layer of paint, make sure to inspect all the surfaces very thoroughly for any minor cracks, bumps, or nail holes in the wall. You will need to fill, repair, or sand these to make sure the surface you are painting is nice and smooth before you get started. This will ensure that the end result is absolutely perfect. For minor cracks, you can use simple painter’s putty and for deeper cracks you can use plaster of Paris.

  1. Use High Quality Rollers, Brushes, & Paint

Using high quality materials can mean the difference between a professional looking job and an amateur looking job. Spending the extra money and time to get the best materials will end up saving you a lot of money and headache in the long run. A nice high quality glossy paint is going to be more stain resistant and be easier to clean, which will save you many headaches over the years. For tools, you need a quality roller that soaks up a lot of paint and lays it on evenly, so that the paint is uniform across the surface. A high quality brush will allow you to perform more detailed work like cutting in around trim and other surfaces.

  1. Make Time for Protection

Time spent covering every surface you don’t want paint on is never time wasted. You will want to make sure you use drop cloths on the floors so that you keep paint where it’s supposed to be. Make sure to cover the little things as well, like doorknobs and other hardware. Also, remove all socket and light switch covers before starting to paint your room.

  1. Use a Bucket

Most amateur painters will want to use the classic painter’s tray, but you will get a much better experience using a bucket. You can put more paint into a bucket, which will result in a more even color throughout the paint job. A bucket can also be moved around much easier than a tray can, which will make your job easier as you move around the room.

  1. Keep a Wet Edge & Roll Properly

Keeping a wet edge is key as you move your roller across the wall and will help prevent dry streaks from appearing as you paint. What a wet edge means is keeping your roller wet with paint and only moving your stroke halfway past your last one. It’s a very simple trick that can really make the difference when painting interior walls.

  1. Paint Top to Bottom

After you have finished painting your baseboards and ceiling, you will want to paint the walls with your roller. When rolling your paint onto a wall, the key is to roll the paint top to bottom. Rolling top to bottom allows the roller to take care of any paint drips that may occur from having a roller full of paint.

These tips should help your painting project come out with a real professional look. While most homeowners will paint a room in their house, not all of them can produce top quality work. If you follow these tips, your guests and neighbors will be asking who you hired to get such great work!

About the Author

Michael Jaconetta is a Licensed Painting Contractor, a General Contractor, and the owner of American Painting & Property Service, a family-owned Florida painting company, dedicated to helping people make their home beautiful. He has over 15 years of experience painting homes and businesses and is passionate about home improvement

A guide on powder coating equipments

Powder coating is a unique and eco friendly way of fabricating a tougher finish to metals, automobiles and home appliances. It offers a great opportunity to go green and to perform our bit towards saving the environment. It’s idiosyncratic in a way that it doesn’t require a solvent to keep the binder and filler parts in a liquid suspension form.  The method of application of the coating is primarily electrostatic. Generally, thermoset and thermoplastic polymers are employed as ingredients for the powder. The aggregates of volatile organic compounds emitted by powder coating are found to be profoundly low in comparison to those emitted by conventional liquid coatings. Thermoplastic powder coatings can be melted on heating and they also retain the same chemical composition once they cool and solidify. The commonly employed powder coating is nylon coating. On the other way round, thermosets acquire different chemical properties when subjected to high temperature heating as they have cross linked structures.

This process is best performed with the aid of powder coating equipments. The main installation of the coating of the base material is carried out by the equipments. The equipments are effective and reliable and offer remarkable finish.

Overview of equipments

The process of powder coating is carried out under three phases. The pre preparation of the base material essentially includes application of lubrication greases and removal of oil and dirt particles. No major equipments are entailed for this job. In some special cases like sandblasting and abrasive blasting, accurate instruments are employed. Electrostatic or corona gun or generally known as powder gun is the most recurrent equipment used for powder coating. They can be equipped with variety of spray nozzles depending on size and requirement of workpiece. A tribo gun is also utilized which charges the powder by triboelectric friction. They are quite efficient than other powder guns. Every now and then electrostatic discs are also used to apply powder. The whole system i.e. electrostatic powder spray system is also available entailed for complete process which is generally suitable for mass production.

Other equipment required for this modulus operandi is powder coating conveyor which conveys the requirements for powder coating and other finishing applications. They can withstand high temperatures thus preventing contaminants from reaching chain & bearing surfaces.  Autocoaters are the equipments used for coating pallets and tablets with enhanced capabilities. Powder coating booths are the equipments built robustly and are entailed with all accessories required. The powder is contained in a chamber and the coating is carried out with extreme perfection. Noteworthy equipment especially employed for powder coating is powder coating oven. It application is done wildly in cases where the product is hanged for continuous transportation inside the oven. Some of the equipments are portable which come with an advantage over others.

Tackling the price factor

The unabridged process of powder coating can be made cost effective. The initial cost of the powder and its application on the base can be easily retrieved against the recycle feature which minimizes waste generation thus reducing the waste disposal costs profoundly. The low operating costs of powder coating technique is also favorable in the long run. Owing to the reduction in emission of voc’s which heat the environment up, the cost of cooling the makeup air is reduced considerably. And this process involves least operator training and supervision for a powder line eventually leading to reduced costs. The finish acquired by the material after being coated is marvelous and it offers resistance to corrosion, heat and abrasion.


Different uses for powder coating

Powder coating is a hard coating or finish that is applied to metals such as aluminum or steel.  This coating, as its name implies, is applied as a powder is not a traditional wet paint which allows it to bond with the metal.  If applied correctly, it will not chip, crack or peel.  Powder coating was first introduced in Australia in about 1967.


At Just Powdercoating you will get wide variety powder coating  colors so it can be used for all types of products from A to Z.  The automobile industry is the largest consumer of powder coating.  Many parts of automobiles benefit from the permanent coating.  It is applied during the manufacturing process so the pieces can easily be sent through the different processes from cleaning, rinsing, application of the powder to the final coat being fired in an oven to 160 – 210 degrees Celsius.    The finish can be a wide range from flat matte to a high gloss or anything in between.  Yes, the automobile industry utilizes this process for many parts of the vehicles.  Motorcycles and other sport vehicles can also benefit from this coating for pieces that in within the vehicle under the hood or the shiny outside.


Powder coating can also be used on ‘used’ pieces of metal to make them shiny and new looking and they will then stay that way.  The preparation step is the most important but if it is done correctly, that old stove, piece of farm machinery or wheel rim will look brand new.  The value of a piece of metal will increase well beyond the cost of the powder coating.  Refreshing the outside of an appliance or other metal object will not just make it look nicer but it will also keep it from rusting which will increase the life of the object.

Leisure pieces of furniture like outdoor furniture such as patio furniture, tables, decorative stands, and chairs when powder coated, will last much longer and will look sharp without having to constantly be repainted.  It holds up well outdoors in the salty marine atmosphere when properly taken care of with washing it down as needed.


Coils, springs, metal fences and other items used in agriculture also are great uses for powder coating.  These are items that are hard to reach and once they are in place, one does not want to climb up high or reach around to try to repaint.  Other similar uses include telecommunication equipment like cell towers, radio and TV towers and power generators windmills have great uses so one does not have to climb up them to paint!


Child’s toys such as metal wagons, tricycles, bicycles and other playground equipment are also great for powder coating in Bayswaters and Bayswater North. Not only do they look great with hard use, but that little one cannot ingest paint chips when they may nibble on a handlebar or other part as little ones could do.


There are many different uses for powder coating.  Check out this process today!

8 Things You Didn’t Know About Paint

Painting has become one of the biggest home improvement jobs that don’t always require a professional. You may think you know all about painting but today you will learn 8 things you probably didn’t know about paint. Painting may seem simple, but there a lot of surprising things about paint, from The White House to before the birth of a nation and even as far back as The Middle Ages. There are many surprising facts about paint that most people don’t know at all. So sit back and let’s learn something new.

1: Purple became a royal color because only the very rich could afford it. Why? Because the process of making purple paint was very complex. You see, during roman times you had to crush 4 million mollusk shells just to get a pound of purple paint! Now that’s a lot of shells.

2: Most Native Americans actually use black paint to signify life and yellow paint to signify death. This is interesting because in many cultures this is usually the opposite. Life is signified by yellow, because of the sun and daytime and black signifies death because of the night and also because black is the lack of color; like the lack of life.

3: Here’s something you probably didn’t know, The White House is painted every single year! Why? Because The White House is white because of the original lime-based whitewash that is used to protect the stone walls of the building; interesting.

4: You probably know that if you mix two colors together you can get a third color, right? Well did you know the first person to realize this was Pluto, the Greek philosopher?

5: The Aztecs really like red paint! The Aztecs loved red paint so much they actually regarded it as more valuable than gold itself!

6: Michelangelo painted the Sistine Chapel in the 1500s and it only took him four years to complete his masterpiece. Surprisingly, when it was restored in the 1900s it took 20 years to restore.

 7: In today’s world our phones are lit up and we can easily read any text at any time with the help of electronic lights and light bulbs, but in The Middle Ages it wasn’t that easy. People actually had to use precious stones and egg yolks to light up their writings.

 8: America was founded in 1776, but did you know that ‘The Color Wheel’ (you may remember it from school) was actually invented by Sir Isaac Newton in 1706, 70 years before the birth of America.

So as you can see there are many things about paint that most people just don’t know and most of them are very interesting! Now look at that, you probably just learned 8 new things today. You should feel good, because as they say, “Knowledge is Power”, and indeed it is. So the next time you go to paint your house or your chair, just remember that there is more to paint then meets the eyes and it has a very vibrant history.

Looking for best landscapers in Melbourne offering affordable landscape designs & ideas? Landscape Shape Form is best for gardening designs and ideas, call us today!


Know Paint’s Your VOC Content?

Painting can be dangerous because of the paint fumes. The reason they are dangerous is because of the volatile organic compounds (VOC’s) found in the paint fumes. Knowing the VOC content of the paint that you use is important because you need to be sure you know how much to ventilate and also how important it is to not inhale the fumes if there are children or pregnant women around. But rest assured, because there are many things you can do to reduce your exposure to VOC greatly or even completely. So read on if you want to know more about VOC and why you should know about it because it might just be very beneficial to your overall health.

How to Avoid It

VOC content varies from company to company, but you can buy indoor or outdoor paint that has a low VOC content level or you can buy VOC free paint. Now if you buy VOC free paint that doesn’t mean that the fumes are completely harmless to inhale, it just means that it is a lot less harmful to inhale. Inhaling paint fumes is never recommended in any situation and honestly should be avoided as best as possible when you are painting. If you are seriously concerned about the paint fumes, you can always hire a professional house painter and you won’t be around the paint fumes or VOC at all.

 The Dangers

Knowing your VOC is very important to your health and the health of the people around you. VOC is released into the air around you as paint dries. Inhaling the fumes can lead to many negative immediate and long term side effects. Some of these side effects include, eye and respiratory irritation, dizziness, headaches, memory loss and one long term side effect is asthma.


Pregnant women are very sensitive to VOC and should avoid it at all costs, because too much exposure to VOC for a prolonged time can result in a miscarriage or birth defects. Children should also avoid VOC because their bodies are still growing and inhaling too much paint fumes could result in an asthmatic child. Once someone develops asthma they usually have it for the rest of their lives, so if you have a child that is on the verge of being asthmatic you shouldn’t take the risk at all.

Ways to Minimize Paint Fume Exposure

There are many things that you can do to reduce your exposure to VOC. To reduce your risk of VOC exposure you should ventilate the area you are painting very well. You can achieve this by opening windows and doors and also keep fans going while you paint and also while the paint dries. If you really just don’t want to take the risk at all you can always hire a professional to paint for you. This option is not always needed because if you just ventilate the area well and wear a construction mask you should be okay because you won’t be inhaling very much VOC. You can also get paint that has very low VOC content or none at all.

Indoor Paint Choices

Choosing the right indoor paint can be a tough decision. Not only are there so many options available, but there are also so many colors and hues to choose from. The whole process can be very daunting to the new painter, but rest assured, there are many things you can do to make the process go a lot smoother. Painting the inside of your home can be a very big project, but before you start anything you should really try and think hard and figure out exactly what you want to accomplish and what color paint you think will work best in your home. Now, if you are preparing to paint your interior for the sake of trying to sell your home, go with simple colors that will be easy to match with any kind of furniture and also make it a very eye-pleasing color as well.

When you go to choose a color for indoor painting there are many things you have to consider. The thing is a color may look great in the store but you could bring it home only to realize it doesn’t look good in the room you bought it for. This is why it’s great to take color samples and bring them home and see how they will look on your wall or door. Keep your mind open when you pick the colors that you want, because who knows, a color you overlook could have made your indoor that much better, so don’t overlook a color; compare.

Different color paints can either liven up a room or make it darker. Other colors can make a room seem bigger or smaller. With that in mind, you should realize picking a color is important; the right color paint can make or break a room. Don’t forget to prime before you paint either (Dark colors or walls you’ve never painted). You need to paint your wall with a primer prior to painting to ensure nothing bleeds through your new paint and will help you start from scratch, smoothing out your paint surface. Industrial painters usually opt for light colors as they maximise lighting potential and give a higher capacity to reflect light.

After you’ve picked out your primer and or paint colors, you will be ready to paint. Be sure you have the necessities, (tape to separate places you want to paint to places you don’t), Paint brushes, rags, and a step ladder (for the ceiling and high places). There may be more things you will need depending on the size of the paint job.

So as you can see, there are many factors when choosing the right color to paint your interior with. What color you choose is up to you, but remember to keep your mind open when choosing your colors. Remember to have all the things you need before you start painting and also remember to take out all your furniture in the room you are going to paint before you start painting. Follow the previous tips and you should end up with a great indoor paint job that you can’t wait to show off.

signage companies in Perth can assist your business build a strong brand, it can help you attract new customers and it can majorly influence peoples’ purchasing decisions. Contact us today for a free quote.

Are you looking for bathroom accessories Melbourne? We have got you covered. Get in touch with us today for a free quote.

How Harmful are Paint Fumes?

symbol-34338_150If you’ve ever painted or you need to do a little painting around your home, you’ve probably wondered how harmful paint fumes are. Well today you will learn just how harmful paint fumes are and how to reduce that risk. Paint fumes aren’t that harmful but that doesn’t mean there aren’t things you can do to help yourself when painting. The chemicals in paint vary from company to company, but mostly the only real danger is the paint fumes that come off the paint after painting. Inside the fumes are VOC which are volatile organic compounds that can cause you immediate harm, including: eye and respiratory irritation, dizziness, headaches, and even problems in your memory. As you can see inhaling paint fumes can be immediately damaging to your body so be sure to take the necessary precautions to ensure your health.

Minimise Exposure

There are many things you can do to decrease these negative effects of VOC. First off, be sure that the area you are painting is nicely ventilated and that the fumes are not just building up in the air you are breathing. While you can wear a paint mask, and definitely should, this won’t stop you from inhaling a little of the fumes, so be sure that there just isn’t much fumes in the air in general. You can do this by keeping the area you are painting very well ventilated by opening windows, having fans going, and also take breaks every so often. This should greatly help reduce the risk of some of the simple effects of breathing in paint fumes.

So just how harmful are paint fumes really?

Well, when some of the fumes were tested on animals, some of the animals developed cancer. Studies have also shown that long term exposure to paint fumes can also cause a more likely chance of developing asthma. If you are pregnant do not paint anything for any reason. Paint fumes are very harmful to the baby if you breathe them in while pregnant; doing this can cause miscarriage and other birth defects. Children should also avoid paint fumes as well as their bodies are still developing and the paint fumes can be very detrimental to their health.

Avoid It If You Can

You can always buy paint that has low VOC content or even VOC free. This will greatly reduce the risk of harmful effects to your body from inhaling paint fumes. This would be your best bet if you don’t want to take the risk of getting sick from inhaling in the fumes. Now just because there are negative effects, don’t let that drive you away from painting. As long as you are safe and ventilate the area well you should be okay.

In conclusion, paint fumes can be very dangerous to inhale, but mostly it’s pregnant women and children that should avoid paint fumes in general. Also, people who are already asthmatic or have problems breathing should also avoid paint fumes. You do have the option to buy VOC free paint, or low VOC content paint, this would be your best bet if you just plain don’t want to take any risk or you are sensitive to paint fumes.